Perfect’s inception lie in the Residential sector.

From humble beginnings in residential strip outs and rubbish removal, Perfect Contracting’s residential demolition lineage now spans more than a decade. With an armada of new machines and a fleet of faithful workers, Perfect’s adherence to first-rate service is a pin we wear with pride. Twelve years of demo sees thousands of residential jobs behind us. If there’s residential demolition to be done – we get it done.

With over a dozen years of residential demolition we have developed our air tight policies and procedure’s for carrying out Residential demolition projects all over Sydney and greater NSW. From brick by brick deconstruction of heritage buildings to 60meter tunnels through sandstone rock. No matter how complex the project we have seen and done it all. Cause that’s what we do, we get it done.

residential demolition sydney


Detailed Demolition

Perfect Contracting provides comprehensive detailed demolition services all over Sydney and greater NSW.

Structural Demolition

With modern technology and engineering methodologies, Perfect can carry out complex structural demolition.

Concrete Penetrations

Perfect has extensive experience when it comes to carrying out concrete penetrations in the residential sector.

Hazmat Removal

Perfect Contracting can carry out Bonded & Friable Asbestos removal projects all across Sydney and greater NSW.

Structural Propping

Perfect Contracting provides integrated structural propping services, including engineering and installation.

Wet Hire

Perfect Contracting offers our entire fleet of specialised machinery and operators for wet hire in Sydney.

Featured projects



Recently, Perfect Contracting was contracted to excavate a pair of tunnels under a residential property at Sydney’s north shore. Built to give easy access to the waterline, the 51m long passage would link to an 18m deep vertical shaft that would soon house a lift. Due to the limited property access, anything of bulk had to be moved by barge. This included any machinery and all waste.

Utilising one of our Brokk 200’s, a Perfect Kubota 2.5t excavator and scores of bulker bags, excavation began in earnest in May 2021. Initial works were focused on concrete cutting and demolition in the existing house to accommodate drilling the vertical shaft. Once this was complete, that task was handed over to Rock Breaking Solutions. Perfect began work on the horizontal shaft.

Due to the proximity of the tunnel to the harbour and the need for constant mist for dust suppression, a false floor was built at the tunnel entrance consisting of multiple layers of geofab. The floor was also ringed with a watertight lip to catch any runoff. Using the speed and efficiency of the Brokk, we began tunnelling toward the vertical shaft. Spoil was loaded into bulker bags with the excavator and stored until the weekly load out onto the barge.

Bore and Excavate 51m of tunnel through sandstone rock
Excavate all rock and soil
Remove all soil through Bulker bags by Barge
Installed multiple layers of geofab to protect the enviroment
Used our Brokk 200 due to vibration and noise rectrictions
Installation of props

Four Storey Residential Block


Perfect Contracting was engaged by CPB Contractors to undertake the full building demolition works at 519 Church St, Parramatta Light Rail Project, the overall height of the building was 12Lm high. The entire structure of the building consisted of double brick walls with a concrete slab for each level. Due to the limited space around the building to setup overhead Protection, Perfect had to think outside of the box and resort to alternative methods for demolition.

Demolition of units started with removal of all hazardous material. Removal and disposal of all detected non/friable asbestos and any lead paint that was included in HAZMAT report. Prior to commencing with any mechanical demolition, any rubbish that cannot be recycled will was manually removed with demolition labourers. The building made safe by hand.

Mechanical demolition started by using a 30T-38T excavator with buckers, grabs, hammer and pulveriser. The building was demolished from top down, the external walls collapsed inwards, and the slabs pulverised progressively until the entire footprint of the building was removed, then the works continued to the lower floors until all the above ground structure is removed. Works were planned around Traffic conditions, with a Stop & go approach to the demolition works. A 37T excavator was used to systematically demolish each part of the structure down to safe level with minimum noise & dust to the neighbouring properties.

The full 4 Storey building was demolished in under 8hrs
All the rubble recycled
Safe Removal of all detected non/friable asbestos and any lead paint
All the structural elements removed by hand using a 85ft knuckle boom.


Perfect is one of the most experienced demolition contractors in Sydney when it comes to residential demolition. We have done it all, soft stripouts, back to base stripouts, penetrations, elevators removal, escalator removal. It doesn’t matter if its twenty stories or single. Perfect have developed our processes and constantly innovated to become more and more efficient at all aspects of residential demolition.

Regardless of the scope, scale or stipulations – Perfect Contracting’s major strength lies in fast, safe and efficient operation. With roots deep in the residential sector, we can hand over your project on time and within budget regardless if its soft stripout works or complex structural demolition. From permits to service disconnection and waste disposal, Perfect’s project management team offers the personalised touch that ensures your civil project is delivered to spec.

Experience in residential works Sydney - Perfect Contracting


The key to Perfect’s continual success is down to one key factor, Our People.

Our crews are the ones out there doing the hard graft every single day, ensuring your project gets delivered on time, every time. Because that’s what we do. We get it done.

From management and operations to engineering and estimating to supervisors and ground workers – Perfect Contracting hires only the best. Continual improvement processes ensure regular training, new tickets and upskilling.

Experience in residential sector Sydney - Perfect Contracting


Perfect operates its own fleet of heavy-duty state-of-the-art machinery ranging from nimble 0.8t excavators to large positracks to 35t excavators. Additionally we operate an armada of hook trucks and skips, tippers, EWP’s, forklifts, Brokks, lifts, scaffolding and almost every tool known to man.

With our continued investment in emerging technologies, safety and innovation, Perfect’s service scope ranges from the simple & straightforward to the thoroughly technical to the downright demanding.

Residential sector - Perfect Contracting